Replacement Hard Drive The Easiest Way

By Dorothy Cook


Anyone can perform this especially if they have the problem with the disk of their computer. Some people are afraid and the fear will dominates in their mind that they could not do it. No need to be afraid if you will only follow instructions. It is very important and in all the things that you would do. So the problem will not occur or worst it can get complicated. Some professionals advise everyone that they should get something that could last for long.

It is necessary so you could save some penny. Buying something with the best quality, you would be worry free. Replacement hard drive will only be finished for like one hour or less. Especially if you have all the materials ready. And have bought the one to replace the old one. Make sure that the old one does not work.

Take a look at these important steps below. You will be guided and the replacement will become successful. Turn on the PC to double check that the disk does not work before you begin. Check the type and model of the old before you go to the store. Write it down and present it to the saleslady. And say if they have something that is reliable and can be used for many years. Best you purchase the latest.

Start in backing up your files. You never know what could happen. This is for your own sake. Especially those files that are very important to you. There is a tendency that you could not recover them without moving and making a copy of them. You could transfer it to another hard drive. Like USB that can accommodates a lot of space.

After you do it, you can now shut down the PC. Do it before you would do anything else. Always practice safety procedures. And never risk your life because you only have the one. And please avoid problems if possible. This is your precautionary measure. And never touch the inner component if you have not turn off everything.

Open the case of the CPU after. So you can see the disk inside and take them out. Get ready with your screw drivers. Most of them are screwed. And cannot be easily removed without having to unscrew them all. And if you see some doors, you have to open it too. To prevent scratches or any problem in taking the old one out.

After opening it, go to the location where the old one is located. Be extra careful in doing that. You might touch the other parts and would mess them up. You have to check if it is screwed inside. Otherwise you cannot remove them right away. Unscrew them and see to it that the other parts will not be damage. You will only remove something that needs to be replaced.

Just be careful not to drop them. Use your hands to hold the side. Touching the surface is not advised. Since you do not know what could happen. And also, no touching on the other parts inside. Just do what you are instruct to do. To avoid complication. When you see the jumpers on the side, you could get them. Since you will be needing them to match the new one.

Get your new purchase and place them inside. The same steps that are mention above when you take it out. And screw everything. And never forget to put the jumpers back. What you should do now is to check if what you do is a success.




About the Author:



No comments:

Post a Comment